Our top load pleated filter bin vents are designed for easy installation, operation, and maintenance. Units include on-demand cleaning capability to keep the system running efficiently resulting in less maintenance and reduced operating cost. Standard models are sized to handle air volumes ranging from 250 to 10,000 cubic feet per minute. Easy top load design allows for filter changeouts in under 30 minutes without the need for special tools.

Bin vents are ideally suited for silos, storage bins, or conveyer transfer points to vent displaced air. Mating flanges allow units to be easily mounted directly to silos, eliminating the need for ductwork. Many of our units are in stock and ready to ship as noted below.
Unit of Measure

Specifications

Media Per Filter (SF)

N/A 39

Number of Filters

N/A 36

Filter Length

N/A 39 in

Filter Area

N/A 1404 ft²

Filter Diameter

N/A 6.25 in

Airflow at 3:1 Air to Cloth Ratio

N/A 4212 ft³/min

Airflow at 4:1 Air to Cloth Ratio

N/A 5616 ft³/min

Airflow at 5:1 Air to Cloth Ratio

N/A 7020 ft³/min

Airflow at 6:1 Air to Cloth Ratio

N/A 8424 ft³/min

Housing Material Thickness

N/A 10 gauge12 gauge

Weight for 12 Gauge Thickness

N/A 1725 lb

Weight for 10 Gauge Thickness

N/A 1725 lb

Note for Weight

N/A Weight including Fan

Baghouse Dimensions

A: Length of Unit (Excluding Fan Support Arm)

N/A 60 in

B: Width of Unit

N/A 60 in

C: Height of Bin Vent (Excluding Mating Flange)

N/A 61 in

H: Fan Support Arm Length

N/A 37 in

Additional Information

Additional Information

N/A
  • High Efficiency Filter Media: Media options that remove 99.99+% of dust particulate
  • Low Energy Requirements: On-Demand Cleaning allows for minimal compressed air usage by pulse only when need, this minimized energy costs and wear on filters.
  • Low maintenance-Demand Cleaning minimizes wear on filters and pulse valves reducing the need for maintenance. All maintenance is done from outside the bin vent or from the clean air side of the unit allowing for quick and easy changeouts.
  • Quick Installation: Units are shipped ready to install. The mating flange makes installing on silos or bins easy, just weld the mating flange in place and bolt bin vent to mating flange.
  • Freestanding unit: Hopper, leg and support package available to convert bin vent to a compact freestanding dust collector.
Bin vents are a compact and economical way to filter and vent displaced air from enclosed areas such as silos, bins, mixers, blenders, and other similar systems. USAF bin vents include a pulse jet cleaning system equipped with on-demand cleaning to ensure efficient operation with minimal maintenance.

Note

Note

N/A Further baghouse dimensional information available. Call for details.